Online shopMy Plansee
Homepage
Online shopMy Plansee
Molybdenum sputtering targets

Molybdenum sputtering targets

Molybdenum layers are the main components of thin-film transistors in TFT-LCD and OLED screens. They control the individual pixels at lightning speed, thereby guaranteeing particularly sharp images. Molybdenum layers are also used for other purposes. For example as the back contact in thin-film solar cells (CIGS, CdTe) and in microelectronics components (frequency filters, lithography).

Your advantages at a glance:

  • High purity
    > 99.97%

  • Maximum density
    > 99.5%

  • Homogeneous microstructure

  • Center of expertise for new coating solutions

Download our product specifications:

Mo planar target specification (machined)

How are molybdenum layers produced?

During the magnetron sputtering process (PVD process), tiny metal particles are released from sputtering targets, which settle as a thin film on a material to be coated (substrate). This process is a cost-effective and fast coating process in which all materials must satisfy the most stringent quality criteria.

Maximum purity

Our targets fulfill stringent purity requirements. The main advantages: excellent electrical conductivity of the layer and minimum particle formation during the PVD process. Metal and non-metal impurities in the sputtering target are transferred to the sputtered functional layer, thereby affecting its function or causing particle formation in the PVD process (arcing effect).

We guarantee that our molybdenum targets have a minimum purity of 99.97%. The typical purity of our molybdenum targets is 99.99%. This is how we guarantee that the layers produced satisfy the stringent requirements.

Maximum density and homogeneous microstructure

Our molybdenum sputtering targets are highly consolidated by means of special forming processes. This results in increased coating rates and improved coating properties in the PVD coating process. The advantages of this lie in the efficiency of the thin film production as well as a high output.

We can adjust the microstructure of the coating material in a targeted manner by means of our manufacturing process. With an evenly formed microstructure of the sputtering targets, you can achieve consistent sputtering rates and film thicknesses.

Center of expertise for new coating solutions

In the PVD coating process, everything must be perfectly matched. It is only if all process parameters are perfectly matched that the layer that suits the customer's exact requirements can be produced. We carry out sputtering under practical conditions in our PVD application laboratory. Our developer team creates layers here and analyzes them in detail according to defined specifications. This means that new coating materials are developed in a very short time in cooperation with customers and numerous development partners. Having worked with system manufacturers and OEMs for several years, we are directly involved in the latest developments and optimizations

Wide selection of target formats

Mo planar sputtering target

We produce planar and tubular molybdenum targets in a single- and multi-part design for all common dimensions and coating systems.

Single-part planar targets can be series produced up to a size of 1.8 x 2.3 m. Multi-part planar target sets can be flexibly produced with a maximum length of the individual parts of up to 3.5 m.

We produce rotary targets in lengths of up to 4 m in a single- or multi-part design. Further information can be found on the product page:

Mo rotary targets

Take a look at a few example applications for our coatings here:

Highest quality from a single source

We have the entire value-added chain for our sputtering targets under one roof: from the procurement of conflict-free raw materials through to the final product. We manufacture compact, metal products from porous powder blanks. We produce planar targets in our hot-rolling mill for refractory metals. We produce rotary targets using our own forming process. Following the machining process, we finalize the sputtering targets ready for installation in our local bonding shops.

As well as developing new materials, we also optimize our layers and coating processes. Sintering is the central process in our powder metallurgical manufacturing process. And this has been true for one hundred years.

    Oxide
    Reduction
    Mixing alloys
    Pressing
    Sintering
    Forming
    Heat treatment
    Mechanical processing
    Bonding
    Quality assurance
    Recycling
OxideMolymet (Chile) is the world's largest processor of molybdenum ore concentrates and our main supplier of molybdenum trioxide. The Plansee Group holds a 21.15% share in Molymet. Global Tungsten & Powders (USA) is a division of the Plansee Group and our main supplier of tungsten metal powder.

Other products for coating technology: